Method 1:

Sulfur beams were produced on 14 GHz ECRIS using SF₆.

Mixing gas: No mixing gas was used

Microwave power: 350 W

Acceleration voltage: 10 kV (JYFL extraction system)

Material consumption: N/A

Note:

5+
6+
7+	35
8+
9+	13.5

Method 2:

Sulfur beams were produced on 14 GHz ECRIS using SO₂. The source tuning was optimised for S⁷⁺beam.

Mixing gas: Oxygen

Microwave power: 270 W

Injection/extraction coil: 492 A/492 A

Acceleration voltage: 10.15 kV (drain current: 1.18 mA) (JYFL extraction system)

Material consumption: N/A

Note: Run R59 (29.8.-11.9.). The given intensity was measured at the end of the run. At the beginning the intensity was above 100 µA (S⁷⁺). The intensity of about 3.5 µA was measured at the target but it was limited to 1.4 µA in order to avoid target destruction.

5+
6+
7+	71
8+	-
9+	-
10+	-
11+	5.5

Browser not supported